Cumberland PNEG-942, Инструкция по установке и эксплуатации

Страница: 9 / 42

1. Safety
PNEG-942 Belt Drive Galvanized Fans 9
General Safety Statement
Thank you for choosing a Cumberland Galvanized Fan. It is designed to give excellent performance and
service for many years. Cumberland’s principle concern is your safety and the safety of others associated
with poultry equipment. We want to keep you as a customer. This manual is to help you understand safe
operating procedures and some problems which may be encountered by the operator and other
personnel.
As owner and/or operator, you are responsible to know what requirements, hazards and precautions exist
and inform all personnel associated with the equipment or in the area. Safety precautions may be required
from the personnel. Avoid any alterations to the equipment, which may produce a very dangerous
situation, where serious injury or death may occur.
Cumberland recommends that you contact your local power company and have a representative review
your installation to verify that all wiring is compatible with their system and ensure an adequate power will
be supplied to your unit.
Electrical Safety
An adequate and safe power supply to the Galvanized Fan is essential for safety. A competent and
qualified electrician must undertake all electrical wiring. All wiring is to be installed according to the
National Standards and Regulations relevant to your Country and Region.
Cumberland recommends that the electrical supply to the Galvanized Fan be provided with a single
lockable isolator (not supplied) in accordance with the requirements of IEC 60204-1: 1997. The isolator
should meet the requirements of IEC 60947-3. An isolator is essential for safety. This should be installed
as indicated on the motor diagrams and in accordance with the relevant codes and directives.
Maintain Equipment and Work Area
• Do not attempt maintenance or repairs on the fan unless you
are competent to do so. Understand service procedures
before doing work.
• Use only genuine Cumberland parts when maintaining the
fan. Use of other non-genuine parts is a misuse and can lead
to dangerous situations.
• Be aware that the fan may operate under automatic control
and may start without warning.
• Lock-out power source before making adjustments, cleaning,
or maintaining equipment.
• Keep area clean and dry.
• Keep hands, feet, and clothing away from moving parts.
• Keep the fan in proper working condition. Replace worn or
broken parts immediately.
• Keep the fan clean. Do not allow debris to collect around
motors, belts, pulleys or bearings.
• Make sure that all electrical enclosures and guards are closed
and locked before re-starting the fan.
ST-0019-2