Cumberland PNEG-942, Инструкция по установке и эксплуатации

Страница: 11 / 42

1. Safety
PNEG-942 Belt Drive Galvanized Fans 11
Safety Signs and Warnings
The following pages show you exactly where the safety signs, warnings and other decals should be placed
on the Galvanized Fans. If a decal is missing, damaged or unreadable, please contact your dealer or
Cumberland, a member of GSI Group, for a free replacement.
Installation Notes
To ensure the safety during installation, make all electrical connections as the final step of installation. This
should be done only when the Galvanized Fans have been fully installed and all guards and covers are
fixed in place. Electrical connection should be carried out only by a qualified electrical installer and should
be to the relevant rules and directives in force in your region.
Installation Tools
The following are the recommended tools for assembly and installation of Galvanized Box Fans:
1. Cordless drill
2. 3/8" Drive ratchet
3. 1/2" and 9/16" Open end box wrench
4. 5/16" Nut driver bit for cordless drill
5. Hammer
6. Scratch awl (to help line up holes)
7. 3/8" Drive inch-pound torque wrench
8. 3/8" Drive 3" extension
9. 3/8" Drive 12 point 3/8" socket (to tighten propeller bolt)
10. 5/32" and 1/8" Hex key wrench
11. 3/16" Drift punch (to set lock collars)
NOTE:
It is recommended to use anti-seize compound (not supplied) for all shaft connections.
For guidance or assistance on any issues relating to the safe use of the Galvanized Fans,
Contact:
Cumberland
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
Use Caution in the Operation of this Equipment
The design and manufacture of the Galvanized Fans is directed toward operator safety. However, the very
nature of a Galvanized Fan requiring electrical power and possessing moving parts does present a hazard
to personnel which cannot be completely safeguarded against without interfering with efficient operation
and reasonable access to components.
Continued safe, dependable operation of automatic equipment depends, to a great degree, upon the
owner/operator. For a safe and dependable Galvanized Fan, follow the recommendations within this
manual and make it a practice to regularly inspect the operation of the unit for any developing problems
or unsafe conditions.
Take special note of the safety precautions listed before attempting to operate the Galvanized Fans.