Error Codes
11
01035157 C 10/20
Air Draw Time
This setting is used to set the time in minutes for
cycle 2. This setting is used for the eduction of
air (rather than brine) to create the air head that
oxidizes hydrogen sulfide within the filter tank. The
display will show “br” in the left most digits and the
cycle time in the right most digits. Adjust the value
with the “+” or “-” keys. The Air Draw Time for the
Sulfur-OX3 filter system is 40 minutes.
Pressing the “Status” key will save the setting and move
to the next programming step.
Fast Rinse Time
This setting is used to set the time in minutes for
cycle 3. The fast rinse setting settles and compacts
the media after backwashing, flushing any residual
iron from the bottom of the filter bed and compressing
the air charge before returning the filter to the
SERVICE position. The display will show “Fr” in the
left most digits and then the cycle time in the right
most digits. Adjust the value with the “+” or “-” keys.
Pressing the “Status” key will save the setting and
move to the next programming step. The Fast Rinse
Time for the Sulfur-OX3 filter system is 5 minutes.
Blank Display
After the last programming menu is displayed
(menu will vary depending on mode of operation),
pressing status will move to a blank display screen.
From the ‘blank display’, pressing the “+” key from
the blank display will enter the diagnostics menu.
From the ‘blank display’, pressing the “-” key will
enter the statistics menu.
From the ‘blank display’, pressing the “Status” key
will exit programming mode and return to the service
mode time display.
The “regen” key is ignored while in the ‘blank display’.
Hidden Programming Menu
(Accessed from the regular time of day display in service mode by holding the “+” key for 5 seconds).
