Culligan Medallist Plus Sulfur-OX3 Скачать руководство пользователя

Страница: 10 / 19

The timer uses four buttons:

Button

Description

Set-up / Enter Key (Status) Advance timer through display options
Reconditioning Cycle Key

(REGEN)

Initiate a reconditioning cycle

Toggle Down Key (“-”)

Decrease the setting

Toggle Up Key (“+”)

Increase the setting

Time of Day

This setting is used to program the current time of day.

When in this step, the display will first show “tod” for two seconds.
After “tod” is displayed, “12:00 PM” will display

(or the current set time if already programmed) and the minutes will flash.

• The minutes are adjusted with the “+” or “-” key until the correct

value is displayed.

• Press the “Regen” key to flash the hours.

Adjust with the “+” or “-” key until the correct time is displayed.

Pressing the “Status” key will move to the next programming step.

Pressing “Regen” will move back to the minutes adjust.

Time of Reconditioning Cycle

This setting is used to program the time at which a reconditioning

cycle is to occur in the delay mode, or in immediate mode with time

clock backup on. The display will first show “tor” for two seconds.
After “tor” is shown the display will then show the default of 2:00 AM

(or the current programmed time of reconditioning if already set).

The time can be adjusted in 30 minute increments by pressing the

“+” or “-” keys.
Pressing the “Status” key will save the setting and move to the next

programming step.

Reconditioning Cycle Interval

This setting is used to set the days between reconditioning in

time clock mode. The display will show “REG” icon and “tcb” for

two seconds and then display the numbers to change. Adjust the

value with the “+” or “-” keys.
Pressing the “Status” key will save the setting and move to the next

programming step. The reconditioning cycle interval is 3 days for the

Sulfur-OX3 filter system.

Backwash Time

This setting is used to program the cycle 1 backwash time. The time

of the cycle is displayed in minutes. The display will show “buu” in

the display for two seconds and then the cycle time in the right most

digits. Adjust the value with the “+” or “-” keys. The backwash cycle

time for Sulfur-OX3 filter system is 15 minutes.
Pressing the “Status” key will save the setting and move

to the next programming step.

01035157 C 10/20

Содержание Medallist Plus Sulfur-OX3




















Результаты поиска

Содержание Medallist Plus Sulfur-OX3

Отзывы:

Похожие инструкции для Medallist Plus Sulfur-OX3

Бренды по названию

Популярные бренды

Culligan Medallist Plus Sulfur-OX3, Руководство пользователя

Результаты поиска

Содержание Medallist Plus Sulfur-OX3

Отзывы:

Похожие инструкции для Medallist Plus Sulfur-OX3

Бренды по названию

Популярные бренды