4
Culligan® Aqua-Cleer® CC Basic™
4
Cat. No. 01021819
Inspect the Unit
All preparation work should be done in a clean area. A separate room is recommended.
NOTE
Inspect the carton for evidence of shipping or handling damage.
1.
Unpack the unit and inspect the plastic parts.
2.
Install Point of Use Assembly Kit—Part Number 01017703
On the CC Basic™ unit, remove the locking pin from the Crystal Guard.
1.
May require the use of a tool to remove pin.
NOTE
Press on the Guard rim and turn counter clockwise to remove (Figure 1).
2.
Open
Crystal Guard
Locking Pin
Figure 1.
Open the POU Kit box and check the assembly for damage.
3.
Verify the float mounting pins are firmly inserted onto the float arm.
4.
Ensure that both floats are positioned downwards.
5.
Install the POU kit on the CC Basic™ unit (Figure 2).
6.
CC Basic™ Inspection and Setup
