13
Oven light
doesn’t
work.
Light bulb is blown.
Replace bulb as described in the
manual in the section “Maintenance and
cleaning
”.
Oven will not
heat.
No function is selected.
Choose a cooking function turning the
selector.
No temperature is selected.
Choose a temperature turning the
selector.
Maintenance and cleaning
⚫
The oven should be cleaned after every use. When cleaning the oven the lighting
should be switched on to enable you to see the surfaces better.
⚫
The oven chamber should only be washed with warm water and a small amount of
washing-up liquid.
⚫
After cleaning the oven chamber wipe it dry.
⚫
Never clean the oven surfaces by steam cleaning.
⚫
The oven cavity should only be cleaned with warm soapy water, using either a sponge
or soft cloth. No abrasive cleaners should be used.
⚫
Any stains that may appear on the bottom of the oven will have originated from food
splashes or spilt food, these splashes occur during the cooking process. These could
possibly be a result of the food being cooked at an excessively high temperature or
being placed in cookware that is too small.
⚫
You should select a cooking temperature and function that is appropriate for the food
that you are cooking. You should also ensure that the food is placed in an adequately
sized dish and that you use the drip tray where appropriate.
⚫
Outer parts of the oven should only be cleaned with warm soapy water, using either a
sponge or soft cloth. No abrasive cleaners should be used.
⚫
If you use any form of oven cleaner on your appliance, then you must check with the
manufacturer of the cleaner that it is suitable for use on your appliance.
⚫
Any damage that is caused to the appliance by a cleaning product will not be fixed free
of charge, even if the appliance is within the guarantee period.
⚫
Do not use cleaning products containing abrasive materials for the cleaning and
maintenance of the glass front panel.
Replacement of the oven light bulb
In order to avoid the possibility of an electric shock ensure that the appliance is switched off
before replacing the bulb.
⚫
Set all control knobs to the position”0”and disconnect the mains plug,unscrew and wash
the lamp cover and then wipe it dry.
⚫
Take the light bulb from the socket, replace the bulb
with a new one-a high temperature bulb(300
℃
)with
the following parameters:
-voltage230V
-power 25W
-thread G9
⚫
Do not use any other type of bulb.
Содержание CUL57MMSS
Страница 1: ...1 CUL57MMSS Oven Instruction Manual...