Culina CUL57MMSS, Инструкция по эксплуатации

Страница: 5 / 15

5
●
I
f the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
●
T
he appliance must be placed in such
a way, that the power supply is
accessible at all times.
●
B
efore connecting the appliance to the
power supply, check that the power
supply voltage and current rating
corresponds with the power supply
details shown on the appliance rating
label.
●
N
ever use a damaged appliance!
Disconnect the appliance from the
power source and contact your supplier
if it is damaged.
●
D
anger of electric shock! Do not
attempt to repair the appliance yourself.
In case of malfunction, repairs are to be
conducted by qualified personnel only.
●
T
o avoid damaging the cord, do not
squeeze, bend or chafe it on sharp
edges. Keep it away from hot surfaces
and open flames as well.
●
L
ay out the cord in such a way that no
unintentional pulling or tripping over it is
possible.
●
D
o not open the appliance casing
under any circumstances. Do not insert
any foreign objects into the inside of the
casing.
●
N
ever use accessories which are not
recommended by the manufacturer.
They could pose a safety risk to the
user and might damage the appliance.
Only use original parts and accessories.
●
K
eep the appliance away from any hot
surfaces and open flames. Always
operate the appliance on a level, stable,
clean and dry surface. Protect the
appliance against heat, dust, direct
sunlight, moisture, dripping and
splashing water.
●
D
o not place objects with open flames,
e.g. candles, on top of or beside the
appliance.
●
W
ARNING: Ensure that the appliance
is switched off before replacing the
lamp to avoid the possibility of electric
shock.
●
T
he fixed wiring for applicant shall have
an all-pole disconnection device.
Safety:
●
A
ttention, the glass is extremely
fragile.Always wear gloves when
handling.
●
F
or your safety, this product is made of
tempered glass. This type of glass is
highly resistant but has the feature to
retain the "memory" of shocks.
●
T
herefore, it should handle the product
with the greatest care to avoid shocks
and twists, especially during installation.
●
A
void installing this type of product in
areas where it would be highly exposed
to shocks.
●
D
o not let children play with the product.
●
D
o not stick adhesive film on the glass
surface. In case of breakage, it would
generate large pieces that could be
dangerous
Electrical connection
D
anger of electric shock!
●
A
ny electrical installation must be
carried out by an authorised
professional.
●
A
ll fittings must be installed by a
competent person in accordance with
local regulations. If in doubt, consult a
qualified electrician.