Culina CUL57MMSS, Инструкция по эксплуатации

Страница: 7 / 15

7
incorporated in the permanent wiring. The switch is to be of approved type and
positioned in accordance with local wiring and electrical rules and specifications. The
switch must have 3 mm air gap contact separation in all poles, in the active (phase)
conductor of the fixed wiring.
⚫
To connect the oven power cord, loosen and remove the cover on the terminal block, in
order to gain access to the contacts inside. Make the connection, securing the cord in
place with the cable clamp provided and then immediately close the terminal block
cover again.
⚫
If you have to change the oven power cord, the earthing (yellow/green) conductor must
always be 10 mm longer than the line conductors.
⚫
The installation must include 1.5m of free cable within the enclosure for ease of
installation and future maintenance.
⚫
The mains cable must not touch any hot metal.
⚫
Care must be taken to ensure that the temperature of the mains supply cable does not
exceed 50°C.
⚫
If the mains supply cable is damaged, then it must be replaced by an appropriate
replacement which can be obtained from Spares Department.
Installing the oven into the kitchen cabinet
⚫
The kitchen area should be dry and aired and equipped with efficient ventilation. When
installing the oven, easy access to all control elements should be ensured.
⚫
Installation method 1:
⚫
Installation method 2: