Culina CUL57MMSS, Инструкция по эксплуатации

Страница: 14 / 15

14
⚫
Insert the bulb in, making sure it is properly inserted into the ceramic socket.
⚫
Screw in the lamp cover.
Remove the door
➢
Full open the door.
➢
Lift the two mobile links of the hinges to position. (picture A)
➢
Close the door to the half-way position. Lift the door upwards
and remove it by sliding the hinges outwards. Hold the door by
the sides close to the hinges when doing this
Install the oven door
Accord to the opposite order of door disassembly
➢
When install oven door, make sure both hinge plug into opening mouth directly.
➢
Both sides of hinge rabbet must bite up each other.
➢
When open the door, spread down locking rod(picture B)
If the door drop accidently or hinges shut up suddenly, do
not push you hand in hinges. Please call your after-sell
department.
Removal of the internal glass panel
Unscrew and unfasten the bracket latch that is in the
corner at the top of the door .Next take out the glass from
the second blocking mechanism and remove. After
cleaning, insert and block the glass panel, and screw in
the blocking mechanism.As shown picture C.
Regular inspections
Besides keeping the cooker clean, you should:
1. Carry out periodic inspections of the control elements and cooking units of the cooker.
After the guarantee has expired you should have a technical inspection of the cooker
carried out at a service centre at least once every two years.
2. Fix any operational faults
Carry out periodical maintenance of the cooking units of the cooker.
Caution!
All repairs and regulatory activities should be carried out by the appropriate service
centre or by an appropriately authorized fitter.