Cuckoo CP-QN1401SW, Руководство пользователя

Страница: 24 / 32

▶
▶
▶
Detach the connecting tube using an appropriate tool (fitting separator). Damage to
the fitting and/or connecting tube may cause water leak.
Before replacing the filter, detach the connecting tube of the filter you wish to
replace.
How To Replace the Filter (CUCKOO Filter (genuine) must be used)
▶
Especially for the Sediment 3.0 Filter, allow water to pass through for about 5
minutes.
▶
Connect the Pre-Carbon Block 2.0 Filter and the Natural 2.0 Filter to the previous
filters, and allow water to pass through for about 7 minutes.
▶
Connect the Nano Positive Filter to the previous filters, and allow water to
pass through for about 10 minutes.
▶
Allow plenty of water to pass through or else it will affect the taste and quality of water.
▶
It is important to supply the purifier with water to check for any water leakage
after filter replacement. Use a dry cloth.
▶
When each filter is connected to fitting hose, filters' labels should be facing to
the right side for 10mm.
Connect the outlet of the previous filter to the inlet of the replaced filter and connect
a separate water extraction tube to the outlet of the replaced filter. Then, open the
tap water supply valve to allow water to pass through.
Fitting Separator
Open
Water
Extraction
Water
Inlet
6
7
24
How To Replace the Filter