Cuckoo CP-QN1401SW, Руководство пользователя

Страница: 16 / 32

16
▶
Before turning on the“Cold”button, make sure the water
supply is available and the tap water supply valve is open.
Press the “Cold” button for about 3 seconds to turn it on.
It takes 60 minutes for the cooler (condenser) to cool the
water. (The blue lamp will be turned on)
Turn the Select lever towards the
Cold Water.
How to Get Cold Water
The first glass may be lukewarm. This is due to the outflow of cold water and hot water through
the same pipe. After the first glass, cold water will be extracted at a normal temperature.
1
▶
The cold water Blue LED will turn off.
If you no longer want to get cold water while the cold water operation is activated, press the
“Cold” button for 3 seconds to stop the cold water function.
2
4
How to Get Purified (Room Temp.) Water
Turn the Select lever towards the room
water.
1
Gently push the cold Water Lever.
2
Lift the cold water lever up at a 90˚ angle, then
continuous extraction of purified water is available.
Lift the cold water lever up at a 90˚ angle, then
continuous extraction of cold water is available.
3
Gently push the Cold Water Lever.
3
※
Please be cautious that if the Hot water or Cold water button is turned off,
the temperature of purified (room temperature) water could be become a
bit hot or a bit cold.
How to Use
▶
※
▶
※
▶
▶
※ [Mood Lamp] On / Off is irrelevant to [Energy Save] function.
※ Please refer to the following [Mood Lamp] on/off set-up method.
▶
▶