Cuckoo CP-QN1401SW, Руководство пользователя

Страница: 18 / 32

18
Setting the temperature
▶
Enter the hot and cold water temperature setting mode. [Initial Setting : Level 3]
▶
Press the hot water button to set the temperature. [The higher Level means the higher temperature]
▶
Press the [Energy Save] button to save the setting.
※
If there is no operation for 7 seconds, it returns to standby mode without saving settings.
Setting the temperature of hot water:Press the [Energy Save] button for 3 seconds.
1
How To Use External Faucet (Optional)
▶
※
If you rub the external valve with a brush or sponge, it may damage the plating of the
valve’s outer surface and may cause the mineral scale to the inside of the external valve.
Move the Lever of the External Valve connected to the
sink down, and then you can use the External Faucet.
Closed
Open
If you have not used the external faucet for an extended period (longer than a day), it is
recommended to open the spigot to allow the still water to flow to clean out the water line.
1
Press for 3 seconds
<Set up Method> <Initial Setting Check>
If you have not used the External Faucet for a long time
with the power connected, the water of the External Valve
may be warm because of the inside heat caused by the
operation of the Heater and the Compressor.
▶
Enter the hot and cold water temperature setting mode. [Initial Setting : Level 3]
▶
Press the cold water button to set the temperature. [The higher Level means the lower temperature]
▶
Press the [Energy Save] button to save the setting.
※
If there is no operation for 7 seconds, it returns to standby mode without saving settings.
Setting the temperature of Cold water : Press the [Energy Save] button for 3 seconds.
2
Press for 3 seconds
<Set up Method> <Initial Setting Check>
“Hot”
Button
“Cold”
Button
“Hot”
Button
“Cold”
Button
“Hot”
Button
“Cold”
Button
“Hot”
Button
“Cold”
Button
How to Use
▶
▶
▶
▶
▶
▶