Cuckoo CP-QN1401SW, Руководство пользователя

Страница: 12 / 32

12
How To Install the Product
❶
Turn off cold water supply to the sink
• Look under the sink, locate the cold water shut off valve for the cold water inlet supply to the faucet.
Turn the shut off valve clockwise to close the water flow from cold water inlet water supply to faucet.
❷
Release Faucet Pressure
• After closing the cold water supply (no water should be able to flow to the faucet), open the faucet
handle as if to dispense cold water. This will release any existing pressure in the line. Some water
may drip out. Make sure to open the faucet as if dispensing COLD WATER.
• Spin the riser nut counter clockwise to disconnect the faucet feedline from the cold water shut off
valve and cold water inlet source.
❸
Disconnect water feed line from under sink cold water inlet to faucet
❹
Attach T-Valve to cold water inlet
• With the cold water inlet remaining closed, screw the T-valve onto the cold water inlet source (same
location that the faucet feedline was removed from). Screw the T-valve on tight with a wrench and
ensure proper connection.
• Connect the riser nut (from faucet feedline) to the open end of the T-valve and tighten with a wrench.
Make sure this connection is secure.
❺
Re-Connect the faucet feed line to the newly attached T-valve
❷
External Outlet(Orange)
Tap Water(Blue)
❶
Closed
❸
Open
Tap Water
Supply Valve
Cold Water Pipe
External Valve
(for sale)
External Outlet
Tap Water Input
How To Install the Product
❺
❻
❼
❽
❾
❿