Cubix XPRMG3-1625URP, Руководство пользователя

Страница: 10 / 14

Cubix Corporation  2800 Lockheed Way  Carson City, NV 89706-0713 ● Page 10
Sales 800.829.0550

http://www.cubix.com

sales@cubix.com

xprm8g3-1625urp-20170801
When a fault occurs, the LCD will jump to that fault and the LCD backlight will flash on / off.
Press the left button to acknowledge the fault and the LCD will stop flashing and enable normal
operation. The LCD will continue to display the fault at the applicable sub-menu until you clear
the fault.
Menu 1: Start Menu
Menu 1 Sub-menu 1 Sub-menu 2 Sub-menu 3
Main menu 1: Cubix Corporation
Sub-menu 1:
PCB Assembly

Board Number

EEPROM Revision

Board Revision
Sub-menu 2: MCU Firmware

Release Number

Release Date
Sub-menu 3: PCB Serial Number
Menu 2: Power Supply Status
Menu 2 Sub-menu 1 Sub-menu 2
Main Menu 2: Power Supply Status
Sub-Menu 1:
Main Power Status:

PWR Standby = Main power is off; system is in standby

PWR ON-Good = Main power is on; +3.3V, +5V, +12, -12V are within spec.

PWR ON-FAULT = Main power is on; +3.3V, +5V, +12V, or -12V is out of spec.
Sub-Menu 2: Optional redundant power supply (RPS) status

RPS Standby = Main Power is off, System is in standby

RPS ON-Good = Main Power is on, power supply/modules are working

RPS ON-FAULT = Main Power is on, power supply/module has failed
Menu 3: Temperature Status
Menu 3 Sub-menu 1 Sub-menu 2
Menu 3: Temperature Status
Sub-Menu 1: Display the temperature of the 3 temperature sensors in degrees Celsius.
Note: If a temperature sensor fails, FLT (fault) appears under the failed sensor.
Sub-Menu 2: Bridge (left), Bridge (right) IC Temperature (Range: 20C-125C, ---C when power is off)
Cubix
Corporation
c
PCB Assembly
A09180 Rev 1A-0A
c
MCU Firmware
Rel 01 06-20-12
c
Power Supply
PWR ON-Good
c
Power Supply
RPS ON-Good
c
Power Supply
Status
c
Temperature
Status
c
Tmp1 Tmp2 Tmp3
24C 25C 26C
c
IC Temperature
65C
c
Serial Number
10200000
c