Cube Kids Bmx, Руководство пользователя

Страница: 33 / 52

ADjuStINg AND uSINg yOuR BIKE KIDS BMX | EN | 31
7.8 Operate the quick-release
action
RISK Of BuRNS!
Quick-release levers on disk brakes can
become hot during riding.
Touch the quick-release lever very
briefly with the bare finger.
If it feels hot let it cool down.
mtb048 (individual parts with arrows and numbered)
Legend:
1: Axle
2:Nut
3: Lever
4: Spring
Our bike hubs and possibly also your saddle stem
may be have quick-releases fittings (often also
referred to as “quick-release clamps” or simply
“quick releases”).
These quick-release fittings make possible rapid
disassembly and assembly of these components
without any tools. This can be by means of a
S long threaded axle on one side of which is
S a nut, and on the other side
S An eccentric lever.
S There is a little spring between the nut and
hub and between the hub and the lever.
S The ends of the springs with the smaller
diameter always face the hub.
S On saddle stem locking quick-releases instead
of the nut there is a bolt head with an Allen
key hexagon insert head.
To open the quick release
1.
Push the eccentric lever away from the hub. It
an now be rotated 180° around its axis.
mtb060
mtb061
2. Turn the nut counter-clockwise until the
wheel can be removed from the frame or
front forks without any great effort. Should
the nut come right off the screw please
ensure that the little springs do not get lost.
mtb055 (arrow)
3. On saddle stem quick release levers: To
loosen instead of the nut turn the bolt with
the Allen key head itself counter-clockwise.
Tightening: Reverse the procedure
4. If the quick release lever was completely
removed then push it from the left (in the
1 2 3
4
4