Cube Kids Bmx страница 43 Скачать руководство пользователя

Страница: 43 / 52

tRANSPORtINg yOuR BIKE

KIDS BMX

10.1

fit and remove wheels

RISK Of PERSONAl INjuRy AND

MAtERIAl DAMAgE!

Incorrectly fitted wheels can lead to

dangerous riding situations, falling, acci-

dents and material damage.

You must have your dealer demon-

strate fitting and removing your road

wheels.

Practice this job at least once under

his supervision and control.

Only remove and fit the seat post

and saddle if you are sure you have

mastered this job.

DANgER Of MAtERIAl DAMAgE!

Hydraulic brakes must under no circum-

stances be operated after removing the

road wheel!
If your bike has a disc brake use the

mandatory transportation wedges sup-

plied for that purpose for transportation

following removal of the road wheel.
Remove these immediately prior to refit-

ting the road wheels.

Please comply with the accompanying

component instructions here.

RISK Of PERSONAl INjuRy AND

MAtERIAl DAMAgE!

Rim brakes only:

When fitting and removing the brake

blocks can get twisted.

When fitting the wheels please note

that the brake blocks are correctly

positioned (see Chapter 6.8).

If these are not correctly positions

please contact a specialist work-

shop.

For transportation you may remove and later

replace the wheels on your bike if these are fitted

with quick releases.

If your bike has rim brakes please note

that you do not change the position

of the brake blocks with the tyre. This

could happen especially in the case of

large-volume tyres. If the tyre do not

easily pass easily between the brake

caliper blocks let a sufficient amount of

air out of them. Then inflate the tyres

afterwards to the correct pressure.

To remove your road wheels. First remove the

front wheel:
1.

Open rim brake.

a) Cable-operated rim brake (e.g. Shimano):

Press the brake shoes together with one

hand and remove the cable guide from

the yoke.

mtb100mtb101mtb102mtb103mtb104

b) On Magura:hydraulic rim brakes:

Move the fixing lever over and remove

the entire brake assembly including brake

booster from the brake sockets.

Please make sure not to lose any

distance washers that may come loose.

Содержание Kids Bmx





















































Результаты поиска

Содержание Kids Bmx

Отзывы:

Похожие инструкции для Kids Bmx

Бренды по названию

Популярные бренды

Cube Kids Bmx, Руководство пользователя

Результаты поиска

Содержание Kids Bmx

Отзывы:

Похожие инструкции для Kids Bmx

Бренды по названию

Популярные бренды