Cube Kids Bmx, Руководство пользователя

Страница: 23 / 52

BEfORE EVERy tRIP KIDS BMX | EN | 21
S It should not be possible to loosen the
brakes from the sockets by hand. A small
amount of play is normal.
3. Check operation of the brake shoes.
S With the brake applied the brake shoes
must be in contact with the rim shoulder
along their entire length.
mtb022
S Under no circumstances must the brake
shoes touch the tyre even when the brake
is not applied.
4. Check the brake block wear.
S Unhinge the brakes (see Chapter 10.1)
S The brake blocks must not be worn down
beyond the wear indicator.
mtb027 (arrow to wear indicator limit)
5. Check centring of the brake shoes.
S The brake shoes must be equidistant from
the rim on both sides.
6.8.3 Check hydraulic rim brakes
mtb029
1. Check correct fixing and screw connections of
the entire brake system:
S Try to pull the brakes out of the sockets
by hand.
S It should not be possible to loosen the
brakes from the sockets by hand. A small
amount of play is normal.
2. Check your brake system seals:
S Operate each brake lever in a static
position and hold the brake lever in that
position.
S Check the brake system from the brake
lever along the lines to the brakes.
S There must be no egress of hydraulic
fluid at any point.
3. Check operation of the brake shoes:
S With the brake applied the brake shoes
must be in contact with the rim shoulder
along their entire length.
S The brake shoe must never touch the tyre
– even if the brake is not applied.
4. Check the brake block wear.
S The brake blocks must not be worn down
beyond the wear indicator.