Last Revised 05/09/2013
21
PTZ640 Functionality
This PTZ dome is different to many other PTZ domes in that presets that are normally
initiated within a tour are initiated instead within a Vector Scan. A Vector Scan is
similar to a tour that is held in a table in the PTZ dome except that it also can initiate a
range of functions such as listed below including other Vector Scans. This gives the
PTZ dome very powerful control options.
255 x
Presets
(setup using keyboard or DVR – keyboard only if over 127)
6 x
Vector Scans
(setup using PTZ menu options) – CALL 83 ~ 88
3 x
Patterns
(setup using PTZ menu options) – CALL 80 ~ 82
1 x
Tour
(setup using PTZ menu option – CALL 65)
In addition the PTZ dome can manually run:-
1 x
Auto Scan
(setup using keyboard or DVR)
Start Point PRESET 52 – End Point PRESET 53 – CALL 52 to run
255 x
Presets
(setup using keyboard or DVR – keyboard only if over 127)
Select PRESET <preset number> then CALL <preset number> to run
1 x
Tour
(initiate using keyboard or DVR)
CALL 65 to run (this calls up to the first 16 presets)
