background image

3

Know 

Your

Utility

Vehicle

Know Your Utility Vehicle

NOTE:  Reference to right or left hand side of the utility vehicle is observed from the operating position.

!

&

'

(

)

*

+

,

.
/

-

%

"

#

$

Read this operator’s manual, safety labels, and operating instructions on the vehicle before operating. Compare the 
illustrations in this manual with your unit to familiarize yourself with the location of various controls and adjustments. 
Reference to the right or left hand side of unit is observed from the operating position. Save this manual for future 
reference.

IMPORTANT: 

Read the Caterpillar Engine operator’s manual before operating this vehicle to familiarize yourself with 

the engine controls and adjustments.

Figure 1

NOTE:  Before operat-
ing your vehicle, follow 
the starting instructions 
in the Operating Section 
and check tire pressure 
per the recommenda-
tions in the Servicing 
Section.

IMPORTANT

Read the Caterpillar 
Engine operator’s 
manual before operating 
this vehicle to familiarize 
yourself with the engine 
controls and adjust-
ments.

A Glow Plug Light

I

12 Volt Power Outlet

B Ignition Switch

J

Accelerator Pedal

C Brake Pedal

K Adjustable Seat Lever

D Differential Lock Lever

L Shift Lever

E Parking Brake Lever

M Cup Holders

F Warning Light Cluster

N Seat Belts

G Engine Over-Temp Light

O Fuel Tank

H 4x4 Switch

Содержание J466

































Отзывы: