background image

15

Transporting Vehicle

IMPORTANT:

 Never tow the vehicle. Transmission 

damage will occur if vehicle is towed. Haul the vehicle on 
a heavy-duty trailer or on a full-size truck.

1.  Once the utility vehicle is loaded onto the trailer or 

truck, leave transaxle gearshift lever in forward or 
reverse. 

2.  Apply parking brake during transport. 
3.  Fasten vehicle to trailer or truck with straps, chains, or 

cables.

Operator Protective Structure 

(OPS)

This utility vehicle is equipped with a Operator Protection 
Structure (OPS) and seat belts. When used together 
they are effective in reducing injuries to the operator in 
the event of an accidental Operator. The safety provided 
by the OPS is minimized if the seat belt is not properly 
adjusted AND buckled. Refer to 

Servicing Your Utility 

Vehicle

 for seat belt adjustment.

4

Operating

Your

Utility

Vehicle

WARNING

WARNING: Always wear the seat belt 
when operating the utility vehicle 
equipped with a OPS. However, if the OPS 
is not present or has been removed, the 
seat belt must not be used.

Use the following guidelines when using a utility vehicle 
equipped with a OPS:
1.  Be aware of overhead clearances in the area of 

operation. Check for clearance of door (or gate) 
openings and other overhead objects such as utility 
lines and tree branches. Overhead objects could 
catch the OPS and upset the utility vehicle.

2.  Do not modify the OPS by drilling holes for, or 

welding accessories to the structure.

3.  Do not use the OPS to pull objects with the utility 

vehicle. Use ONLY the utility vehicle hitch for pulling.

4.  In the event of an accident, have the OPS carefully 

inspected and, if necessary, replaced by your Cub 
Cadet dealer. Do not attempt to repair the OPS.

Always wear the seat 
belt when operating 
the utility vehicle 
equipped with a OPS. 
However, if the OPS 
is not present or has 
been removed, the seat 
belt must not be used.

To help prevent 

personal injury due 

to loss of control or 

tipping, always tow a 

load slowly enough to 

maintain control.

Содержание J466

































Отзывы: