17
SERVICE AND MAINTENANCE
Troubleshooting
Problem
Cause
Remedy
Excessive vibration
1.
Blade loose or unbalanced.
2.
Cutting blade damaged, unbalanced or bent.
1.
Tighten cutting blade and deck spindle.
2.
Replace the blade.
Uneven cut
1.
Deck not properly leveled.
2.
Cutting blade dull or damaged.
3.
Uneven tire pressure.
1.
Perform front-to-rear deck adjustment.
2.
Sharpen or replace cutting blade.
3.
Check and correct tire pressure in all four tires.
Tractor will not mulch grass
1.
Wet grass.
2.
Excessively high grass.
3.
Dull blade.
1.
Do not mulch when grass is wet.
2.
Mow once at a high cutting height, then mow again at desired
height or make a narrower cutting swath.
3.
Sharpen or replace blade.
Tractor stopped or will not start
1.
Electrical system fault.
1.
Shut off and restart tractor. If problem persists, contact an
authorized service dealer.
Blades do not rotate/blades stopped
1.
Overload.
2.
Low battery.
1.
Allow deck motor(s) to cool/raise deck height.
2.
Return home, plug into charger.
Blade(s) stopped when traveling in reverse 1.
Blade(s) stopped.
1.
Restart blade(s) (PTO). Make sure Reverse Caution Mode
is activated.
Reduced speed
1.
Low battery.
2.
Overload.
1.
Charge battery as instructed in the Charger Operator’s Manual.
2.
Raise deck.
Содержание ENDURO XT Series
Страница 55: ...NOTES...
Страница 56: ...NOTES...
