CU Medical Systems Paramedic CU-ER1, Руководство оператора, Страница: 82 / 115

CU-ER1 Operator’s Manual _ver 3.00
When the SmartMedia Card is inserted into the Paramedic CU-ER1 for
recording of rescue data, all the data present in the SmartMedia Card are
overwritten with data from the current rescue operation. The previous data
are no longer retrievable.
To preserve data through a series of rescue operations, the data must be
transferred to a personal computer before using the SmartMedia card again.
The same is true with the internal flash memory. Previously recorded data are
overwritten every time new data are recorded in the internal flash memory
during a rescue operation.
Stored data in the internal flash memory are not overwritten if the data in a
current rescue operation are stored in a SmartMedia Card. Thus, the data in
the internal flash memory are still available for review when the Paramedic
CU-ER1 is turned ON without the SmartMedia Card inserted.
11.3 DATA TRANSFER TO PERSONAL COMPUTER
The data from the previous rescue operation stored in the internal flash memory or the
SmartMedia card are overwritten every time the Paramedic CU-ER1 is used in a rescue
operation.
To keep data permanently, it must be transferred to a computer that is running the CU
Expert ECG Data Management Software. The CU Expert is an optional data management
software available from CU Medical Systems, Inc.
Data transfer can be done through the IrDA port or the UART port of the Paramedic CU-
ER1.
11.3.1 IrDA
Connect the IrDA transceiver to the COM1 or COM2 serial port of the PC hosting the CU
Expert ECG Data Management Software.
Align the IrDA transceiver with the IrDA port of the Paramedic CU-ER1. Insert the
SmartMedia Card if the data to be transferred is in the SmartMedia Card. See the
illustrations on the CU Expert User’s Manual
The Paramedic CU-ER1 must be set to communicate through its IrDA port by setting the
COM PORT to IrDA as outlined in the GENERAL DEVICE SETUP of the section on MENU
OPERATION.
82