CU Medical Systems Paramedic CU-ER1 Скачать руководство пользователя страница 25

Страница: 25 / 115

CU-ER1 Operator’s Manual _ver 3.00

Initial Screen Display Legend

Flashing pads
icon

Indicate the location where the defibrillator electrode pads must be
placed

Battery Level Indicator: Power provided by the internal battery pack

Shows the charge status of the battery pack of the Paramedic CU-ER1

The battery is fully charged

Battery level is 80% of full charge

Battery level is 65% of full charge

Battery level is 50% of full charge

Battery is almost empty.

Recharge the battery pack when

this icon is displayed. Do not wait for the battery pack to be totally drained.

the device is powered by an AC adapter or a Car cigar lighter jack

Battery Level Indicator: Power provided by the external battery pack

Shows the power level of the external battery pack of the Paramedic CU-ER1.

Battery level > 90% of full level.

90% > Battery level > 60% of full level.

60% > Battery level > 30% of full level.

30% > Battery level > 10% of full level.

Battery level < 10% of full level.

When this is

displayed, the battery pack must be replaced. Do not wait for the battery
pack to be drained below the level wherein the Paramedic CU-ER1 could not
operate anymore.

Elapsed time

The time that elapsed since the Paramedic CU-ER1 was turned ON
during the current rescue operation.

Chest
Compression :
Breath ratio
indicator

This is the indicator on the screen that tells you the current setting of
the chest compression

breath ratio

Text Prompt

Indicates actions that you need to do.

Содержание Paramedic CU-ER1




















































































































Результаты поиска

Содержание Paramedic CU-ER1

Отзывы:

CU Medical Systems Paramedic CU-ER1, Руководство оператора, Страница: 25 / 115

Результаты поиска

Содержание Paramedic CU-ER1

Отзывы: