CU Medical Systems Paramedic CU-ER1, Руководство оператора, Страница: 52 / 115

CU-ER1 Operator’s Manual _ver 3.00
5.2.2 Battery Charge Check
The internal battery pack of the
Paramedic CU-ER1 is fully charged before leaving the
factory. In the course of storage in the distribution system, the battery pack may be
depleted when the
Paramedic CU-ER1 reaches you.
The Manual Self-Test in the previous section can detect a drained battery pack condition.
At this condition, the
Paramedic CU-ER1 displays an error message when it is turned ON
and it can not be used in a rescue operation. If a low battery error occurs during the
manual self-test in the previous section, recharge the battery pack.
When the battery pack is not fully drained, check the battery level by activating the Menu
and accessing Battery History (see section 4.5.2 – Battery History). If the battery status is
LOW, recharge the battery pack.
5.2.3 Battery Charging
Charge the internal battery pack of the
Paramedic CU-ER1 if the Manual Self-Test
indicates a Battery Failure error or if the indicator in the Battery History Menu indicates
LOW battery status.
To charge the battery pack, see Section 8.2 – Internal Battery Pack.
5.2.4 Configuration Settings
You must set the following parameters of the Paramedic CU-ER1 before deploying it for use.
Time and Date Settings
The
Paramedic CU-ER1 is equipped with a timer integrated circuit that continuously
keeps track of time and date.
You must set the timer when you receive the
Paramedic CU-ER1 .
To set the time and date, see section 4.5.6 – General Device Setup
52