CU Medical Systems Paramedic CU-ER1, Руководство оператора, Страница: 76 / 115

CU-ER1 Operator’s Manual _ver 3.00
10 Troubleshooting
10.1 Self-Tests
The Paramedic CU-ER1 executes automated and manual self-tests to verify the
functionality of its major subsystems.
The
Paramedic CU-ER1 raises alarms if it detects a fault during those self-tests. It raises
more alarms when it is turned ON after a fault is detected.
Alarms
Alarms raised after a failure is detected during Power On or Run Time Test:
1. The Paramedic CU-ER1 displays the error name and code on the LCD screen
2. The ERROR indicator light turns ON.
3. The beeper emits short beeps at regular intervals
Alarms raised after a fault is detected during self-tests (automatic and manual):
1. The ERROR indicator light turns ON then OFF.
2. The beeper emits a single beep.
3. The alarms stated in 1 and 2 are repeated every minute while the Paramedic is
OFF.
Alarms raised when the
Paramedic CU-ER1 is turned ON after a fault is detected during
automatic or manual self-test:
1. The Paramedic CU-ER1 displays the error name and code on the LCD screen
2. The ERROR indicator light turns ON.
3. The beeper emits short beeps at regular intervals
Self-Test Errors
Error Name Code Fault Remedial Action
LOW BATTERY 0001 Low battery charge Recharge the battery
SYSTEM ERROR 0002 NAND Flash memory failure
Return to an authorized
service center for repair
SYSTEM ERROR 0004
Random Access Memory
(RAM) Failure Return to an authorized
service center for repair
SYSTEM ERROR 0008
Real Time Clock (RTC)
Failure Return to an authorized
service center for repair
SYSTEM ERROR 0016
Complex Programmable
Logic Device Return to an authorized
service center for repair
76