CTX BOMBAPRO PH-RX, Инструкция по эксплуатации и техническому обслуживанию

Страница: 67 / 120

ENGLISH
67
Main features
Type
ON
-O
FF
PRO
PO
RCI
ON
AL
PH
- RX
Max.
Flow
l/h
Max. Pressure
bar
Max imp./mín.
Output per
stroke
ml
Stroke
mm
Suction
height
m
Standard power
supply
Volts/Hz
Power
cons.
Watts
Current
cons.
Ampere
Net
weight
kg
2-5
 
2 5 120 0,28 0,60 2 230 V 50 - 60 Hz 22 0,11 3,5
5-7
  
5 7 120 0,70 1,00 2 230 V 50 - 60 Hz 22 0,11 3,5
10-5
  
10 5 120 1,40 1,15 2 230 V 50 - 60 Hz 50 0,25 4,2
20-3
 
20 3 120 2,77 1,80 2 230 V 50 - 60 Hz 111 0,51 4,2
Fig. 2
Fig. 3
The diagrams of fig. 3 indicate max metering pump flow variation in relation to the working pressure in the plant; the
diagrams also include injection valve losses. I.V.P.
Due to production requirements the technical characteristics of our equipment at maximum ratings can vary with a
tolerance of 5% which must be taken into account when choosing the type of pump.
Installation
A) Install the pump in a dry place and well away from sources of heat and, in any case, at environmental temperatures
not exceeding 40°C. The minimum operating temperature depends on the liquid to be pumped, bearing in mind that it must
always remain in a liquid state.
B) Carefully observe the regulations in force in the various countries as regards electrical installations (Fig.4).
When the supply cable is devoid of a plug, the equipment should be connected to the supply mains by means of
a single-pole circuit breaker having a minimum distance of 3 mm between the contacts. Before accessing any of the
electrical parts, make sure that all the supply circuits are open.
Fig. 4
5/7
2/5
10/5
20/3