CTP Systems CTPhone 1900, Руководство по применению

Страница: 31 / 132

DOC00101-01 2-3
CTPhone 1900 System Planning
Multiple Systems (CTPhone Controllers) in Separate Locations
Figure 2-2 illustrates two CTPhone Controllers installed in completely sep-
arate areas of a facility. Each CTPhone Controller represents a distinct
system and is configured with a unique system ID. (For information on sys-
tem IDs, see Table 4-D on page 4-10.) This configuration might be used
when CTPhone extensions are needed in different functional areas of a
business such as manufacturing and purchasing and CTPhone handset
users do not plan to operate their phones within the other system.
Handset users can operate their phones within both systems if their hand-
sets are programmed with both system IDs and their handset extensions
are configured within each system. However, since having two CTPhone
extensions requires two separate analog lines, special configuration of the
office telephone system is necessary to ensure that a user receives out-
side calls to either system in an acceptable manner. Furthermore, handoff
does not operate between base stations connected to different CTPhone
Controllers.
Coverage: 31,000 square meters (333,560 square feet) per base station
Maximum Number of Configured Users: 32 per system (CTPhone Control-
ler)
Figure 2-2. Multiple Systems
Base Station 1 Base Station 2
CTPhone
Base Station
broadcast area
Location 1
Location 2
Base Station 3 Base Station 4
Controller 1
CTPhone
Controller 2