CTI 2500-RIO-B Installation and Operation Guide V1.4
Copyright © 2018 Control Technology Inc.
All rights reserved.
This manual is published by Control Technology Inc., 5734 Middlebrook Pike, Knoxville, TN 37921.
This manual contains references to brand and product names which are trade names, trademarks,
and/or registered trademarks of Control Technology Inc. Siemens® and SIMATIC® are registered
trademarks of Siemens AG. Other references to brand and product names are trade names,
trademarks, and/or registered trademarks of their respective holders.
DOCUMENT DISCLAIMER STATEMENT
Every effort has been made to ensure the accuracy of this document; however, errors do occasionally
occur. CTI provides this document on an “as is” basis and assumes no responsibility for direct or
consequential damages resulting from the use of this document. This document is provided without
express or implied warranty of any kind, including but not limited to the warranties of
merchantability or fitness for a particular purpose. This document and the products it references are
subject to change without notice. If you have a comment or discover an error, please call us toll-free
at 1-800-537-8398 or email us at
REVISION HISTORY
V1.0
07/10/13
Original Issue
V1.1
9/4/13
Add Alternate wiring diagram and cable specs
V1.2
5/27/2014
Changed “JP1” references to “JP4” to correct error
V1.3
9/9/2014
Added Immediate and Interrupt IO Note in Section 1.1
V1.4
4/24/2018
Added “Note: Addresses above STW242 are used only by CTI’s 2500
Series® CPU’s. ” in Section 2.9. pdb
