8 • EN
OPERATING INSTRUCTIONS
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate
that the mains cable is connected to the wall socket. The error lamp will
indicate if the battery clamps are incorrectly connected. The reverse
polarity protection will ensure that the battery or charger will not be
damaged.
3.
Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when is lit.
The battery is fully charged when is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall
socket.
RECOMMENDED MINIMUM AWG SIzE FOR AC
ExTENSION CORDS
lENGTH OF CORD
FEET (M)
AWG SIzE
OF CORD
25 (7.6)
18
50 (15.2)
16
100 (30.5)
12
150 (45.6)
10
SUPPLY
NORMAL
RECOND
RECOND
SUPPLY
MODE
ABSORPTION,
READY TO USE
ANALYSE
NORMAl
BATTERY
PROGRAM
ERROR lAMP
RECOND
PROGRAM
SUPPlY
PROGRAM
POWER
lAMP
MODE-
BUTTON
DESULPHATION
SOFT START
BULK
FLOAT,
FUllY CHARGED
PULSE,
MAINTENANCE CHARGING
TEMPERATURE
SENSOR
INDICATOR
READY TO USE
The table shows the estimated time for empty battery to 80% charge
BATTERY SIzE (Ah)
TIME TO 80% CHARGED
40Ah
1.5h
100Ah
3h
200Ah
6h
300Ah
16h
20021718A Multi US 25000MXS 25EC NA, Manual, Insert pages, Print file_003.indd 8
2015-02-12 15:54:08