MNX10030 Rev 0
8/20/2008
4
Mounting
1. Attach the enclosed mounting brackets to the NEMA enclosure at the
predetermined locations (if applicable).
2.
Conduit Entry:
If you are running conduit to your enclosure, CTC
recommends the conduit cable entry from the bottom of the enclosure when
mounted.
NOTE: To ensure moisture will not flow into the enclosure, a hole should
be drilled at the lowest point in the conduit to provide drainage for any
moisture.
Section II
Installation
Figure 2. Mounting Bracket Location
Mounting
Brackets
CTC Vibration
Enclosure
Cable Input
(From Sensors)
Cable Outputs
Power Cable
Input
Figure 3. Conduit Entry Layout
