CTC Union iSAP5100, Руководство пользователя

Страница: 35 / 40

Chapter 4. Provisioning
35
The following command connects channel 1 of IO card in slot 4 to SDH first E1, first Timeslot:
admin@iSAP5100(cross) io-connect io-slot 4 io-port 1 vc12e1 1 1
io connect map add success
admin@iSAP5100(cross)
4.3 Mirroring an E1 channel
Establishing channels between E1 ports belong to Cross-connect configurations.
The command to mirror the E1 is as follows:
admin@iSAP5100(cross) e1-cross src-slot 1 src-port 10 1-10 dec slot 1 dec-port 12 1-10
io connect map add success
admin@iSAP5100(cross)
The command above function is: Crossing between 1-10 time slot
of 10E1 card and 1-10 time slots of the 12E1
4.4 Broadcast E1
The direction of broadcast is uni-directional. E1 channel is the source for broadcasting. The receivers can be E1 ports,
VC12, IO ports.
4.4.1 Configure Broadcast Source
Configurations as follows:
admin@iSAP5100(cross) broadcast-source add slot 1 port 13 1
broadcast sourse add success
admin@iSAP5100(cross)
Set the channel 13 time slot 1 of the 16E1 card in Slot 1 to broadcast source.
4.4.2 Configure Broadcast Listener
Enter “broadcast-listener add”, then the available broadcast listeners will be listed.
Configurations as follows:
admin@iSAP5100(cross)
broadcast-listener add
===============all broadcast information =====================
all broadcast source :
broadcast-lecturer 1: 1:13:1
select broadcast source id <1-32>:
1
There is only one broadcast listener. Enter “1”, then the following information will appear. Select “listener mode” and
then select “1”.
select listener mode e1-slot(1) vc12e1(2) io-slot(3) <1-3>:
1
Then, select the broadcast listener’s slot, port, timeslot.
select e1 slot <1-18>: 1
select e1 port<1-16>: 14
select e1 timeslot <1-31> (1-2,5,10-15): 1
broadcast listener add success
E1
Channel
DXC E1
Channel