CTC Union iSAP5100, Руководство пользователя

Страница: 11 / 40

CHAPTER 1. INTRODUCTION
11
1.3.5 iSAP-FOM02 Card

Uplink Fiber

The number of port: 2

Data rate: 155M

Connector: FC

Ethernet

The number of port: 2

Connector: RJ-45

Speed: 10/100Mbps Full Duplex, Auto-Negotiation

E1 Port

The number of port: 4 channels

Connector: RJ45 or BNC (via RJ45 to BNC cable)

Line code: HDB3

Line impedance: 75 ohms (Unbalanced) or 120 ohms (Balanced)

"Pulse" amplitude: Nominal 2.37V (75 ohms) or Nominal 3.00V (120 ohms)

ITU standards: G.703, G.704, G.732, G.823
1.3.6 iSAP-8E1 Card

Frame Format: CAS (PCM30)/CCS (PCM31)/Unframe

CRC: ON/OFF

Loopback: Local loopback (LLB), remote loopback (RLB), bi-directional loopback

Speed: 2.048Mbps

Interface: RJ45 or BNC (transfer to BNC via RJ45)

Line Coding: HDB3/AMI

Rx Sensitivity: -20/-43dB

Line Impedance: 75 ohm (unbalanced)/120 ohm (balanced)

Level Range: 2.37V (75 ohm)/ 3.00V (120 ohm)

Jitter Performance: Comply with ITU G.823 (equipped with jitter attenuator)

ITU Standards: G.703, G.704, G.732, G.823

Internal BERT test
1.3.7 iSAP-16E1 Card

Frame Format: CAS (PCM30)/CCS (PCM31)/Unframe

CRC: ON/OFF

Loopback: Local loopback (LLB), remote loopback (RLB), bi-directional loopback

Speed: 2.048Mbps

Interface: RJ45 or BNC (transfer to BNC via RJ45)

Line Coding: HDB3/AMI

Rx Sensitivity: -20/-43dB

Line Impedance: 75 ohm (unbalanced)/120 ohm (balanced)

Level Range: 2.37V (75 ohm)/ 3.00V (120 ohm)

Jitter Performance: Comply with ITU G.823 (equipped with jitter attenuator)

ITU Standards: G.703, G.704, G.732, G.823

Internal BERT test