CTC Union FRM220-NMC, Руководство пользователя

Страница: 146 / 182

Appendix A
144
UTP Port 3 Provisioning
<1>
Port Active : When disabled, this port will no longer transfer any data and the link will be down.
<2> Negotiation : The UTP ports of this converter follow IEEE802.3u standards for n-way auto-negotiation. The port can also
be manually configured, over-riding the auto-negotiation in "forced" mode. These port settings are explained in more detail
under the section 3.3.9.2
<5>
QoS Default Port Priority : The internal switch provides 4 priority queues (0~3) for QoS packet processing. Each of the
ports of the switch can be set a default priority.
<6> & <8>
Ingress/Egress Rate Limit : These bandwidth control settings are explained in more detail under the section 3.3.7.
<S> Confirm and Save Settings : Any settings made in this menu are not saved or become active until this save procedure is
completed.
UTP Port 3 Negotiation
By changing the negotiation setting from 'Auto' to 'Manual', the additional menu items 3 & 4 are revealed.
<3>
Speed : The UTP ports support 10 or 100 forced configuration speed.
<4> Duplex : The UTP ports support Full or Half-Duplex operation modes.
*************************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-10/100A ver:3.016 ***
*************************************************
<< Local UTP 3 Status and Configuration >>
Link Status [Up ]
Speed [100M]
Duplex [Full]
<1> :Port Active [Enable ]
<2> :Negotiation [Auto ]
<5> :QoS Default Port Priority [0]
Ingress Rate Limit:
<6> :IRL Index [Unlimited]
Limit Rate [Unlimited]
<8> :Egress Rate Limit [Unlimited]
<S> :Confirm and Save Settings(Port Active,
Speed, Duplex and Negotiation).
<ESC>:Go to Previous Menu.
*************************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-10/100A ver:3.016 ***
*************************************************
<< Local UTP 3 Status and Configuration >>
Link Status [Up ]
Speed [100M]
Duplex [Full]
<1> :Port Active [Enable ]
<2> :Negotiation [Manual]
<3> :Speed [100M]
<4> :Duplex [Full]
<5> :QoS Default Port Priority [0]
Ingress Rate Limit:
<6> :IRL Index [Unlimited]
Limit Rate [Unlimited]
<8> :Egress Rate Limit [Unlimited]
<S> :Confirm and Save Settings(Port Active,
Speed, Duplex and Negotiation).
<ESC>:Go to Previous Menu.