CTC Parker Automation PowerStation P1, Руководство пользователя, Страница: 25 / 86

Available Connectors
P1 PowerStation User Guide
17
2. Copy this file and MODE.COM into the \STARTUP directory of the
IPM project on your development system. CTC provides a copy of
MODE.COM on the P1 ROM-DOS Utilities Disk.
3. Run Interact Project Manger (IPM), and download the project that
contains AUTOEXEC.BAT and MODE.COM from your develop-
ment system to the PowerStation.
During the download, IPM transfers the AUTOEXEC.BAT file you
created in step 1 and MODE.COM into the \STARTUP directory specified
by the INTERACT_STARTUP environment variable. This environment
variable resides in the PowerStation’s AUTOEXEC.BAT.
When IPM finishes the download, the PowerStation automatically reboots,
and MODE.COM configures the COM port to the required baud rate. For
example, if you are communicating at 9600, NONE, 8, and 1, use:
MODE COM1: 9600,N,8,1
Note If you will be printing to a port that is configured for downloading,
you must disable downloading for that port, and reboot the Power-
Station. Rebooting the PowerStation allows MODE.COM to reset
the communication settings for that port. Use the DOWNLOAD
ENABLE command on the SETTINGS menu of the Shell to disable
downloading.
4. Use the following diagram as a reference when connecting a serial
printer to the PowerStation.
StockCheck.com