5
Installation -
Tiled Roof
STEP 5
Lift the higher row of
tiles and using a piece of
timber or similar to wedge
to the tiles in the up
position.
Return the flashing to the
roof and place as per the
initial markings made in
step 2.
STEP 6
Using a soft hammer, form
the flashing to conform with
the tile profile.
Position the varipitch
temporarily onto flashing
and make any final
adjustments. Turn the
bottom edge of the flashing
over the lower tiles. Form
the bottom edge of the
flashing so that the higher
tiles can be replaced with
minimal gaps. Remove the
varipitch for next steps.
Take care to avoid unnecessary movement of the top row of
tiles. Excessive movement of these tiles may damage the
ridge tile pointing.
For additional weather proofing, turn the top edge of the flashing
upwards so that it seals against the tile above.
