8
Installation -
Tiled Roof
STEP 12
Check the varipitch level
again and ensure it is still
level across all directions.
Screw the varipitch to the
flashing with the three
screws provided at the
pre-drilled holes on the
varipitch.
Lock the varipitch by
screwing the fixing clip into
the lower half with one of
the screws provided.
Ensure the top of the varipitch is horizontal relative to both the
lateral axis across the roof and the longitudinal axis in-line with
the roof pitch.
Notch
Apply sealant internally to the varipitch seam.
Do not seal the varipitch to the flashing.
Fix with supplied screws
Lock Varipitch
Lock Varipitch
Fix with supplied screws
STEP 11
Position the varipitch over
the flashing upstand.
Using a spirit level for
guidance, rotate the two
varipitch halves until the
top of the varipitch is
horizontal in all directions.
Varipitch adjustments are
best made off the flashing
and then returned to
check the position.
Ensure the varipitch is the
correct way up by keeping
the notched edge to the
top.
