VCC-HD3 Rev. 905-0051-Z0
©2016 CIS Corporation. All rights reserved.
23
Top Menu
Setting
Menu
Selected
Items
Explanation
Gain/Shutter/IRIS
Shutter Min
Limit
Same as
Shutter Value
To set the Minimum Shutter Limit when Shutter Mode is at
Auto.
※
Note 1
／※
Note 2
Shutter Max
Limit
Same as
Shutter Value
To set the Maximum Shutter Limit when Shutter Mode is
at Auto.
※
Note 1
／※
Note 2
Set Shutter
Limit
None
Push the CENTER button to settle the shutter limit.
When Max < Min is set, the setting will not be valid.
AE Speed 0
～
15
To set AE
convergence speed
.
ExpCompValue
-18
～
0
～
18
[dB]
To set Exposure Compensation Value.
Metering Mode
Average
To set metering mode.
Average
：
Averaging metering
Center Weighted
：
Center weighted metering
Spot
：
Spot metering
Backlight Compensation: Backlight compensation metering
Center
Weighted
Spot
Backlight Comp
Spot Block X 0
～
15
To select the X coordinate value of the Left edge Block of the
metering area when Metering Mode is set to
“
Spot
”
.
Spot Block Y 0
～
15
To select the Y coordinate value of the Top Block of the
metering area when Metering Mode is set to
“
Spot
”
.
Spot Block W
1
～
16
To select the width (Block number) of the metering area when
Metering Mode is set to
“
Spot
”
.
Spot Block H
1
～
16
To select the height (Block number) of the metering area
when Metering Mode is set to
“
Spot
”
.
Set Spot Block None
Push the CENTER button to confirm Spot Block, X, Y, W,
and H.
Flicker Cancel
ON/OFF
To set flicker cancel.
※
Note 1: If you prefer setting further details, please set them via serial commands.
※
Note 2: The values set via serial commands will be reflected to key operation.
※
Note 3:
There may be error (small differences) between the set shutter value and the actual shutter value.
For the actual shutter value, please refer to Section 10.4.3.
Actual Shutter Value limited by output format.
