CSI PLS 500 series, Руководство пользователя

Страница: 8 / 24

Conference System Incorporated EAST 1.800.614.7574 WEST 1.800.255.2111 www.conferencesystems.com
All specifications are subject to change without notice. 8
PT-500 Portable Transmitter, Programming, Battery Status, LCD Display
Battery Status Icon
The status of the battery is
indicated by the battery
symbol on the LCD.
This segment will blink when batteries are low.
When the batteries are almost fully discharged,
the battery segments and the red LED near the
volume control will blink quickly. When this
occurs, less than 5% of the battery life is
remaining and the batteries should be
immediately replaced or recharged.
As fewer battery segments are displayed, the
lower the battery level, as shown.
When the battery is fully charged, all three
segments of the battery symbol will be
displayed, as shown.
When dots are illuminated, the microphone
is active. If this display does not appear, the
microphone is muted.
PT-500 Transmitter LCD Display Description
Indicates the currently
tuned channel
Indicates the unit is in PROGRAM
mode (see above)
Used for advanced
channel programming
(see above)
Battery level indicator.
The indicator flashes, along with
the red LED on top of the unit,
to alert you when the battery is
low and needs to be charged
or changed. (see information
above)
Transmitter LED Indicator
Slow Flashing when
Charging
= Unit is
charging
Slow Flashing =
Battery is low
Steady Red LED =
Proper operation
PT-500 Transmitter Programming
If you wish to change the reception channels of the A
or B button from 1 and 5 to 2, 3 or 4, see the following
procedure.
1. If you wish to change the A button preset, press
the A button and hold it until the PGM indicator
shows up in the lower left corner of the LCD
display.
2. Once the PGM indicator is displayed, press the A
again and step through the available preset
channels 1, 2, 3, 4 or 5.
3. When you see the number of the channel you
wish to select displayed, release the A button for 4
seconds. The system will automatically remember
the new preset channel number.
4. Repeat the above procedure for setting the
channel on the B button.
5. For more advanced channel setting (channels
6-19) please contact the CSI Technical Service
Department (Page 4).
Quick Flashing = Mute
is activated