CSI PLS 500 series Скачать руководство пользователя страница 5

 

CSI Limited Warranty 

Warranty Terms 

February 1, 2010 

 

Conference Systems warrants its products to be free from defects in workmanship and 

material under normal use and conditions for a one-year limited manufacturer's 
warranty.  

 

Accessories are warranted for 90 days from date of purchase. This warranty is only 
available to the original end purchaser of the product and cannot be transferred. 

 

Warranty is only valid if warranty card has been returned within 90 days of purchase. 
 

Warranty does not cover normal wear and tear on the product or any other physical 

damage unless the damage was the result of a manufacturing defect. 
 

The warranty is void if damage occurred because of misuse or if the product has 

been repaired or modified by anyone other than a factory authorized service center.  
 

Conference Systems is not liable for consequential damages due to any failure of 

equipment to perform as intended. Conference Systems shall bear no responsibility or 
obligation with respect to the manner of use of any equipment sold by it. Conference 

Systems specifically disclaims and negates any warranty of merchantability or fitness 

of use of such equipment including, without limitation, any warranty that the use of 
such equipment for any purpose will comply with applicable laws and regulations. The 

terms of the warranty are governed by the laws of the state of Maryland, USA. 
 

Conference Systems will only accept returned products with prepaid shipping and 

with a return merchandise authorization number (RMA). To receive an RMA number, 
visit 

http://www.conferencesystems.com/repairs/new

. You may also call 

1-301-330-

9090

 or e-mail 

[email protected]

.  

 
Warranty terms, prices and specifications of products are subject to change without 

notice. 

 

Содержание PLS 500 series

























Отзывы: