SIGNATURE SERIES
3
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will cause
swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that Dow
Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound is used in the
manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended that
Teflon® tape be used to seal plastic Noryl® threaded fittings.
Softener Specifications
General Specifications
SD48
SD48V
SD64
SD64V
SD96
SD96V
SD128
SD128V
Grains Capacity - Regeneration /
Lbs Salt Used (Per Tank)**
24,000 / 12.0
20,000 / 7.5
15,000 / 4.5
32,000 / 15.0
27,000 / 9.0
20,000 / 6.0
48,000 / 24.0
40,000 / 15.0
30,000 / 9.0
64,000 / 30.0
54,000 / 18.0
40,000 / 12.0
Maximum Raw Water Hardness (grains)
50
75
100
100
Maximum Clear Iron / Manganese
3
5
5
5
Exchange Resin (cu. ft. per tank)
.75
1.0
1.5
2.0
Mineral Tanks (polyglass)
(2) 8 x 44
(2) 9 x 48
(2) 10 x 54
(2) 12 x 52
Brine Tank (polyethylene w grid & safety)
18 x 33
18 x 33
18 x 33
18 x 33
Service Flow Rate (gpm per active tank)
8.0
10.0
11.0
12.0
Backwash Flow Rate (gpm)
1.5
2.0
2.4
3.5
Gallons Used / Regeneration
79
90
101
140
Backwash Flow Rate (gpm)
Vortech (V) Units
1.2
1.5
2.0
2.4
Gallons Used / Regeneration
Vortech (V) Units
69
78
90
117
Space Required
18 x 34 x 52 18 x 34 x 56 18 x 36 x 62 18 x 40 x 60
Approximate Shipping Weight (lbs)
139
169
237
299
