manualshive.com logo in svg

CSI CSI-DSP85-250-L7, Руководство по эксплуатации продукта

Поделиться
Скачать
CSI CSI-DSP85-250-L7 Скачать руководство пользователя страница 4

-4-

 Product Registration Information

DISCLAIMER: All  information  and  statements  contained  herein  are  accurate  to  the  best  of  the 
knowledge of Cellular Specialties, Inc. (CSI), but Cellular Specialties makes no warranty with respect 
thereto, including without limitation any results that may be obtained from the products described 
herein or the infringement by such products of any proprietary rights of any persons. Use or ap-
plication of such information or statements is at the users sole risk, without any liability on the part 
of Cellular Specialties, Inc. Nothing herein shall be construed as licence or recommendation for 
use, which infringes upon any proprietary rights of any person. Product material and specifi cations 
are subject to change without notice. Cellular Specialties’ standard terms of sale and the specifi c 
terms of any particular sale apply.

The general safety information in this guideline applies to both operating and service personnel. 
Specifi c warnings and cautions will be found in other parts of this manual where they apply, but 
may not appear in this summary. Failure to comply with these precautions or specifi c warnings 
elsewhere in the manual violates safety standards of design, manufacture, and intended use of 
equipment. Cellular Specialties, Inc. assumes no liability for the customer’s failure to comply with 
these requirements:

 Grounding 
 

This Digital Repeater system is designed to operate from 100-240 VAC and should always 

 

be operated with the ground wire properly connected. Do not remove or otherwise alter the 

 

grounding lug on the power cord.

 Explosive Atmospheres
 

To avoid explosion or fi re, do not operate this product in the presence of fl ammable 

 

gases or fumes.

 Lightning Danger
 

Do not install or make adjustments to this unit during an electrical storm. Use of a suitable 

lightning arrester, such as CSI’s model number CSI-CAP, is very strongly recommended.

No User Serviceable Parts Inside
 

HAZARDOUS VOLTAGES ARE PRESENT WHEN THE COVER IS REMOVED.

 Opening the 

chassis will void your warranty. If you suspect a malfunction with this product, call your dealer or 
the Cellular Specialties Support Line at: 

(603) 626-6677, Toll Free (USA) 1-877-844-4274

.

Safety Guidelines

This guide should be applied whenever a need exists to add Digital Repeater capability to an 
existing system or when this capability is being included with a new installation.

 Application

 Document Purpose / Intended Users

The purpose of this document is to provide a step-by-step procedure to help the experienced 
technician/engineer install and commission an in-building wireless enhancement repeater system 
using CSI’s Digital Repeater. Following the procedures outlined will minimize risks associated with 
modifying a live system and prevent service interruptions. This document assumes the technician/
engineer understands the basic principles and functionality involved with Repeater and in-building 
systems. It is geared to the practical concerns of the installer.

The serial number may be found on the label on the bottom panel near the power 
connectors. Note this number below. Retain this manual, along with proof of pur-
chase, to serve as a permanent record of your purchase. 

MODEL NUMBER  

SERIAL NUMBER            PURCHASE DATE

POINT OF SALE COMPANY

Radio and Television Interference

NOTE: This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment.  This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense. In order to maintain compliance with FCC regulations 
shielded cables must be used with this equipment. Operation with non-approved equip-
ment or unshieled cabled is likely to result in interference to radio & television reception. 
Changes and Modifi cations not expressly approved by Cellular Specialties can void your 
authority to operate this equipment under Federal Communications Commissions rules.

-37-

Notes

Содержание CSI-DSP85-250-L7





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды