manualshive.com logo in svg

CSI CSI-DSP85-250-L7, Руководство по эксплуатации продукта

Поделиться
Скачать
CSI CSI-DSP85-250-L7 Скачать руководство пользователя страница 18

-18-

If the user selects  Local Network from the  System Status page, the following screen is displayed 
and from here network confi guration can be modifi ed as required. The default is set to Static. Check 
with your IT department for explanation and approval of the DHCP and DHCP Server options you 
plan to use before you select them. *NOTE:  In units with software version 2.2.4 or prior, only letters, 
numbers and underscores are acceptable nomenclature.  In units with software version 2.3.0 and up, 
Underscores are not acceptable; however, hyphens are acceptable.

After any changes are made press the refresh button to review the fi elds and ensure the change 
made is correct. Note: changing network settings will cause the current TCP/IP connection to fail 
because the change will  take effect immediately. From here the user may return to the System Status 
screen or click on the other options. 

Local Network

-23-

To end the session exit  the browser, the user will be automatically logged out. 

Figure 1

Figure 2

Local access to  the repeater TMI, also known as the console interface, is made by connecting a 
 serial cable (optional), as shown in fi gure 1, from  the serial connector of the laptop to either of the 
serial ports on the bottom end panel of the repeater. These connectors are labeled COM 1 and COM 
2. In some cases, if the gender of the connector is not the same as shown in fi gure 1, a  null modem 
adapter (optional) as shown in fi gure 2 may also be required.

Text Menu Interface (Local Access)

By clicking on the Change Password link the user is brought to the Change Password page.  From here he or she can quickly 
and easily reset the password for the unit.  A word of warning here be careful when setting the new password. If you forget 
what you set your password to you’ll need to contact CSI at 1-877-844-4274 for assistance.

  Change Password

Содержание CSI-DSP85-250-L7





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды