manualshive.com logo in svg

CSI CSI-DSP85-250-L7, Руководство по эксплуатации продукта

Поделиться
Скачать
CSI CSI-DSP85-250-L7 Скачать руководство пользователя страница 20

-20-

To change SNMP settings click  SNMP Confi guration in the navigation box, the screen below will be 
displayed. If the user is not well versed in Simple Network Management Protocol he or she should 
check with their IT professional for proper setting requirements.

Remote Network

SNMP Confi guration

If the repeater includes a USB modem kit, click on  Remote Network in the navigation box and the 
screen below is displayed. Highlight the carrier on whose network the repeater and modem will 
be confi gured and click the Change Settings button. Refer to the documentation included with the 
modem kit for additional information on confi guring the modem. If the repeater is connected to an 
ethernet device for remote access and/or monitoring, this feature must be disabled.

-21-

By clicking  System Health the current state of the repeater can be reviewed.

Should a software install or upgrade be needed it can be done from the  Install & Upload screen 
shown below. As with the other screens it can be reached by clicking the words in the 
navigation box. Contact CSI for updates and instructions.

System Health

Install & Upload

***The user may clear LED indicators, alarms and the  Event Log by clicking the Clear Log button.

***

****

 

If required in your municipality, visit the “System Health” screen and click on “Trigger Test 

Alarm” and wait for confi rmation that the Service Provider representative that is responsible for 
monitoring the repeater has been notifi ed of the alarm. Be sure to “Clear All Logs” prior to logging 

out of the Web Interface.

****

Содержание CSI-DSP85-250-L7





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды