manualshive.com logo in svg

CSI CSI-DSP85-250-L7, Руководство по эксплуатации продукта

Поделиться
Скачать
CSI CSI-DSP85-250-L7 Скачать руководство пользователя страница 19

-22-

If a reboot of the repeater becomes neces-
sary click on the Reboot option in the 
navigation box and the  Reboot page is 
displayed.

Reboot

The Log Confi guration page provides the user with the means to modify 
three aspects of how log fi les are created and stored as shown below.

Log Confi guration

 Alarm Confi guration

The Alarm Confi guration page allows the user to specify what 
events will trigger an alarm. 

*NOTE:

  Letters, numbers & hyphens 

are the only acceptable 

nomenclature for the Location fi eld and hyphens may not be 
used as the fi rst or last character. 

 E-mail Confi guration

E-mail Confi guration page allows the user to enter up 
to fi ve E-mail addresses to which the repeater can send 
specifi ed alarm messages when the repeater is connected 
via ethernet or wireless modem and E-mail Alarm Notifi ca-
tion or Remote Networking are enabled.  

*NOTE:

  

In all 

fi elds the software will not allow the user to enter invalid 
characters.

-19-

If the user would like to modify RF confi guration click on the words  RF Confi guration in the navigation 
box and the screen below is displayed.

The user inputs the gain value desired. Gain values from 53.5 dB to 85.0 dB may be selected. The 
repeater will not allow the user to set values outside this range. If a new fi lter set is required, the new 
fi lter may be selected from the “ Program a Filter page” below.

The user may select the desired fi lter by pressing the band/sub-band and  modulation selection 
buttons. Undesired bands/sub-bands if lit will require the user to manually “deselect” them before 
programming.   Pressing the Program button will complete the selection and load the desired fi lter. 
The time required to complete this process will take just a few moments.  Note: If the fi lter desired 
is not currently in the unit, additional fi lters along with instructions on how to load them are available 
by contacting CSI.

RF Confi guration

Program a Filter

Содержание CSI-DSP85-250-L7





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды