CSI CSI-DSP85-250-L7, Руководство по эксплуатации продукта

Страница: 11 / 20

-30-
Telnet and serial sessions both provide access to the same Text Menu Interface. We have already
shown many of the options available and all are self explanatory, so they will not be repeated.
A modem can also be used to gain remote access to the unit provided the repeater has been prop-
erly equipped. A selection of modems is available as an option. If the modem requires a SIM card
for activation, special requirements must be met for the SIM card to become fully functional, con-
tact the service provider. In addition, an IP address must be obtained and entered into the repeater.
Once the modem has been installed and activated, it can be accessed from any terminal emula-
tion program just as in the serial and Telnet examples provided earlier. Access response time will
depend on many factors, some of which are:
•
Quality of the connection (RF signal in the case of wireless modems)
•
Technology (CDMA, EDGE, GPRS, etc.)
•
Network congestion (Throughput)
When a connection has been established, the same login screen shown in both the serial and
Telnet examples is presented.
Modem Interface (Remote Access with login)
-11-
Mounting the Digital Repeater
The following diagrams illustrates the methods for mounting the repeater(s) in a typical wall or rack installation. Brackets are provided
for both options.
Rack mount of the repeaters requires just two brackets mounted to the front corners of each module. Note: the CSI digital repeaters
must be supported in the rack system with a shelf or slide rail.
Do not rely on the brackets exclusively to support all the weight of
the modules.
Mount the Cross Band Coupler on the wall close enough
to the repeater modules to allow the RF jumpers to reach
from the CBC to the repeaters. The attachment system
used to anchor the CBC to the wall must be able to sup-
port at least 8.4 lbs / 3.8 kg.
The wall anchoring system you use for the repeaters will
need to be able to support at least 39.2 lbs/ 17.8 kg for
each dual band module and 23.2 lbs/ 10.5 kg for each
single band add on module. The power supplies are
mounted approximately as shown.
Interconnection of the repeaters in the rack or wall mount confi guration requires the short RF Jumpers supplied with the CBC Mod-
ule. The actual interconnections will depend on the bands and cross band coupler module being used. Contact Cellular Specialties
Support Line at:
(603) 626-6677, Toll Free (USA) 1-877-844-4274 should you have questions about your specifi c application.