CS DSR 520, Руководство по эксплуатации

Страница: 15 / 28

6) Tone burst switch
If.the.receiver.is.connected.to.a.satellite.system.for.the.simultaneous.reception.of.several.satellites.
(multi-feed.system),.then.assign.the.respective.LNB.(menu.line.1).to.its.input.on.the.tone.burst.
switch.using.the.
VOL
◀ ▶
.buttons.
7) DiSEqC mode
You.can.use.the. VOL ◀ ▶ buttons.to.select.the.DiSEqC.mode..Select. DiSEqC . 1.0 for fixed systems
and. DiSEqC 1.2 .for.motorised.systems..If.you.select.DiSEqC.1.2,.the.line. Motor Settings .will.appear.
in.the. Installation .menu.
Press. EXIT .to.leave.the.menu..Use.the. VOL
◀ ▶
.buttons.to.choose.whether.you.want.to.store.the.
changes.made.( Yes ).or.keep.the.previous.settings.( No ). Confirm your choice with the OK .button.
Installation – Channel search
This.digital.receiver.has.been.pre-programmed.at.the.factory.with.most.of.the.digital.TV.channels.and.
RADIO.stations.for.the.following.satellites
-. Astra.. .
19,2°.east,.
-. Hot.Bird.. 13°.east,.
-. Türksat.1C.. 42°.east,.
-. Sirius.2/3.. ..5°.east,.
-. Amos.1.. ..4°.west,
-. Hellas.Sat.2.. 39°.east.
You.can.read.which.satellite.channels.are.already.pre-programmed.when.you.call.up.the.channel.list.
in.TV.or.RADIO.mode.using.the.
LIST .button..
New.satellite.channels.are.constantly.being.added.and.satellite.parameters.can.change..We.therefore.
recommend.that.you.carry.out.a.channel.search.from.time.to.time.
Use.the CH
s t
.buttons.to.move.the.cursor.in.the. Installation .menu.to.the.line. Channel search .and.
press.the. OK .button..The.following.menu.will.appear: