CS DSR 520, Руководство по эксплуатации

Страница: 7 / 28

Connecting up the receiver
You will find the corresponding labelling on the back of the unit (see diagram on page 5).
Connecting a satellite antenna
Connect.your.satellite.system’s.coaxial.cable.to.the.IF-INPUT.DIGITAL.socket.(3).
Warning: If, after connecting the receiver to the mains, the message “short circuit or antenna
input overload!” is displayed on the screen, then there is a short circuit in the LNB cable or
the LNB. In this case the receiver must be disconnected from the mains immediately until the
short circuit has been dealt with.
Connecting a television
Use.a.scart.cable.to.connect.the.TV.socket.(5).on.the.receiver.to.the.corresponding.scart.socket.on.
the.television.set.
Connecting a video recorder
Use.a.scart.cable.to.connect.the.VCR.socket.(4).on.the.receiver.to.the.corresponding.scart.socket.on.
the.video.recorder..
When.the.video.recorder.is.switched.to.playback.mode,.the.video.and.sound.signals.will.be.relayed.to.
the.television.via.the.receiver.(loopthrough.mode)..This.requires.the.digital.receiver.to.be.in.standby.
mode.
Connecting the mains adaptor
Connect.the.DC.plug.of.the.mains.adaptor.supplied.with.the.unit.to.the.socket.DC-INPUT.+12V.(2).
on.the.receiver.