CS DSR 520, Руководство по эксплуатации

Страница: 10 / 28

0
Operating the receiver
Switching on and off
-. You.can.switch.on.the.receiver.with.the.OK,.change.channel.or.one.of.the.number.buttons..The.last.
active.channel.will.be.displayed..(e.g..0015)
-. To.switch.the.digital.receiver.into.standby.mode,.press.the. .button..Display:.
-
Note:
The.digital.receiver.is.only.fully.disconnected.from.the.mains.when.it.is.unplugged.from.the.mains.
outlet.
Selecting operating mode
You.can.choose.between.TV.(television.programmes).and.RADIO.(radio.stations).modes.
-.Select.the.desired.mode.with.
RADIO .or. TV .
Adjusting the volume
The.volume.cannot.be.adjusted.while.in.menu.mode.
-.Set.the.desired.volume.using.
VOL ◀ .or. VOL ▶ .
..A.volume.bar.will.be.displayed.on.the.screen.
NOTE:
Changes.in.volume.regulate.the.sound.signals.to.the.TV,.VCR.and.AUDIO.L.R..sockets.on.the.digital.
receiver.
Turning off the sound (Mute)
•
Press.the. .button:.the.sound.is.now.muted..A.symbol.will.appear.in.the.bottom.right.corner.of.
the.screen.
•
Press.the.. .button.again:.the.sound.is.now.on.again.
Channel selection
1. Normal channel changing:
Move.back.and.forward.through.the.channels.by.pressing.the. CH
s
or. CH
t
.buttons.as.many.
times.as.required..To.scroll.quickly.through.the.channels.hold.down.one.of.the. CH
s
or. CH
t
.
buttons.for.as.long.as.necessary.
2. Selecting channels directly:
Enter.a.one-.or.multi-digit.channel.number.using.the.buttons. 1-0 .on.the.remote.control.then.press.
OK .to.call.up.the.channel.directly..Unassigned.channel.slots.will.be.ignored.
3. Selecting channels from the channel lists:
Pressing.the. LIST button.displays.the.last.active.channel.list.or.favourites.list..Use.the. VOL
◀ ▶
.
buttons.to.scroll.through.the.channel.list..Select.the.desired.channel.with. CH
s
or. CH
t
.and.
call.it.up.with. OK .