CS DSR 520, Руководство по эксплуатации

Страница: 16 / 28

Channel search
1.. Use.the CH
s t
.buttons.to.move.the.cursor.to.the.line. Satellite .and.use.the. VOL
◀ ▶
.buttons.
to.set.the.desired.satellite.
2.. Select.the.line. Search mode .with. CH
st
.and.use.the. VOL
◀ ▶
.buttons.to.select.the.desired.
search.mode.
Transponder :. In.this.mode,.only.one.transponder.is.searched..For.this.you.have.to.enter.the.
frequency,.polarisation.and.symbol.rate.of.the.transponder.
Satellites :.. In.this.mode,.the.transponders.for.the.channels.stored.in.the.channel.list.will.be.
searched.for.new.channels.
3.. In.the.line. Encrypted .use.the. VOL
◀ ▶
.buttons.to.select.whether.the.channel.search.should.also.
search.for.encrypted.channels.
No .. =.encrypted.channels.will.be.ignored.
Yes .. =.encrypted.channels.will.also.be.included.in.the.list.
The.following.settings.are.only.carried.out.in.the.search.mode. Transponder .
4.. Use.the. CH
st
.buttons.to.move.the.cursor.to.the.line. Frequency ,.press.the. OK .button.and.use.
the 1-0 buttons to enter the channel’s 5-digit frequency then confirm the entry with OK .
5.. Use. the. CH
st
.buttons. to.move. the. cursor. to.the. line. Polarisation .and. use. the. VOL
◀ ▶
.
buttons.to.set.the.polarisation.(vertical.or.horizontal).
6.. Use.the. CH
st
.buttons.to.move.the.cursor.to.the.line. Symbol rate ,.press.the. OK .button.and.
use the 1-0 buttons to enter the symbol rate then confirm the entry with OK .
Use.the. CH
st
.buttons.to.move.the.cursor.to.the.line. Start channel search ,.then.start.the.channel.
search.by.pressing.the. OK .button.
Two.windows.will.now.be.displayed.listing.the.newly.found.TV.channels.and.radio.stations.
In.the.“Status:”.window.you.can.see.how.far.the.search.has.progressed.
-.Display:..
Scanning ..=>.search.is.active
-.Display:.. Complete ...=>.search.has.been.completed.
When.leaving.the.menu.( EXIT .button).you.will.be.asked.whether.you.want.to.store.the.new.channels.
( Yes ).or.delete.them.again.( No )..Make.your.selection.with.the. VOL
◀ ▶
buttons and confirm it with
the. OK .button.
The.newly.found.channels.will.be.added.to.the.end.of.the.channel.list.
Installation – Factory default settings
This.menu.item.is.used.to.reset.the.receiver.to.the.factory.default.settings..Afterwards.it.will.revert.to.
the three start menus as in the first-time installation.