Crystal Vision Up-and-down-A, Руководство пользователя

Страница: 29 / 44

Crystal Vision
Using the front control panel
Up-and-down-AAFD User Manual R1.22
28
17/11/2010
Video Control Menu (format converter mode)
Pressing F1 from the home menu will bring up the Control menu which contains the
output select, ARC controls and gains and controls. The final menu structure will depend
on the operating mode selected.
Menu Comment
Output standard
selection Rotate shaft encoder to select Output Selection.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value.
Standard Definition, 1280 x 720p, 1920 x 1080i.
Press the Enter button to accept the new value.
Note:
The output line rate will always follow the input rate.
Aspect ratio
selection
Rotate shaft encoder to select the ARC Selection.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value.
Press the Enter button to accept the new value.
Note:
With a High Definition input, if the output standard is selected
to be the same as the input, the message
ARC – IP = OP No ARC
Cntrl
will be displayed and the Up-and-down-A will automatically
enter bypass mode.
Rotate shaft encoder to select the Detail control.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value
(0-50).
Press the Enter button to accept the new value.
User controls are not available in format conversion mode.
Rotate shaft encoder to select Green Gain.
Press F2 to select to change the value.
Rotate shaft encoder to select value (80-120%).
Press the Enter button to accept the new value.
Rotate shaft encoder to select Blue Gain.
Press F2 to select to change the value.
Rotate shaft encoder to select value (80-120%).
Press the Enter button to accept the new value.
Rotate shaft encoder to select Red Gain.
Press F2 to select to change the value.
Rotate shaft encoder to select value (80-120%).
Press the Enter button to accept the new value.